Skip to main content

The new-and-improved Mod-T 3D printer isn’t just better — it’s cheaper, too

Introducing the MOD-t (2nd Gen) Desktop 3D Printer - Available for Pre-Order on Kickstarter
When we reviewed the original New Matter Mod-T 3D printer last year, we found a feature-packed machine at a reasonable sub-$500 price — which fell short of greatness because of the sometimes unreliability of its printing. “At the end of the day, we couldn’t hit ‘print’ on the Mod-T and walk away with complete confidence that the part would come out OK and until that changes, it’s hard to recommend this machine,” we begrudgingly wrote.

Well, jump forward 18 months and New Matter is back for another go-around with a new version of the Mod-T. While it looks very similar in design to its predecessors, it’s packing a few additions and an even lower price, which could finally set it on the path to greatness.

“While 3D printing use-cases vary wildly, making it tricky to satisfy everyone, there were some common themes in the feedback we received on the first generation model which we applied directly in designing the Mod-T, second gen,” New Matter CEO Steve Schell told Digital Trends. “Some of these are more obvious, like the speed improvement, while others are less noticeable, like doubling the Wi-Fi signal strength to improve connectivity, or adding an Ethernet port in case a hardwired network connection is preferred.”

The second-gen Mod-T builds on the positive elements of the original (such as its affordability, design, simplicity, and ease of use) with average print times that are reduced by 30 to45 percent, improvements to print quality, refinement of the user interface, and greater levels of reliability.

If New Matter has nailed all of these improvements, it could be onto a winner in the desktop 3D-printer ranks. That’s certainly something customers seem to be confident of — based on the fact that it has already racked up more than $40,000 of its $100,000 funding goal in its very first day on Kickstarter.

If you want to get your hands on a machine, you can get hold of one for $199, plus shipping. A higher priced bundle, including three spools of PLA filament and three print surface plates, will set you back $299. The second-gen Mod-T is set to make its way to users in May 2018.

Editors' Recommendations

Luke Dormehl
I'm a UK-based tech writer covering Cool Tech at Digital Trends. I've also written for Fast Company, Wired, the Guardian…
Doodles become augmented reality art with Snapchat’s new 3D Paint tool
Snapchat

https://digitaltrends-uploads-prod.s3.amazonaws.com/wp-content/uploads/2019/10/3d-create-paint-snapchat-press.mp4

Tired of Snapchat’s usual round of face filters? Soon, you can paint your own augmented reality Lenses using a new tool called 3D paint. Rolling out beginning October 30, 3D Paint allows Snapchat users to draw in augmented reality using the front-facing or rear-facing cameras on iOS 8 or later, with a future update bringing the tool to Android.

Read more
Selfies just went 3D with Snapchat’s new camera mode that responds to movement
snapchat 3d camera mode snapchat3dselfie2

Your Snaps. Now in 3D.

Snapchat is giving Snaps depth with just a wiggle of the smartphone in the new 3D Camera Mode. On Tuesday, September 17, Snap Inc. unveiled 3D images and 3D filters on the platform, a camera mode that uses the smartphone’s depth data to create a dimensional image complete with Snapchat’s iconic augmented reality lenses.

Read more
Can’t afford this $150 tripod head? Just 3D print the Edelkrone Ortak FlexTilt
edelkrone ortak flextilt 3d printed head 2

Edelkrone’s FlexTilt Head 2 is a versatile tripod head with a unique hinge design, but the $150 accessory is now available for about $30 -- and the cost of 3D-printing materials. On Tuesday, June 11, Edelkrone launched the new Ortak line, the start of a series of co-manufactured photography accessories that can be printed at home.

The Ortak FlexTilt Head 3D is the first product in the series, a version of the $150 FlexTilt Head 2. The tripod head uses a hinge-style design and friction for quick height adjustments, as well as adjusting the camera to more angles, such as for an overhead shot.

Read more