New infrared imaging technique reveals molecular orientation of proteins in silk fibres

New infrared imaging technique reveals molecular orientation of proteins in silk fibres
The orientation of the C = O, C-N, and N-H bonds in amide structure of the L-section of silk fiber confirmed in this study by the hyper-spectral imaging. Credit: Australian Synchrotron

A large international collaboration has used a specialised technique on the infrared microspectroscopy (IRM) beamline at the Australian Synchrotron to determine the structure of proteins in individual silk fibres that has potential use in the design of new biomaterials with desirable properties.

The technique, hyper-spectral , is a powerful analytical tool because it can establish the link between micro-/nano-structures and specific material properties of biomaterials. 

The investigation included researchers from Swinburne University, Tokyo Institute of Technology, Deakin University, the Australian Nanofabrication Facility, The Centre for Physical Sciences and Technology in Lithuania, Dr Mark Tobin and Dr Pimm Vongsvivut from the Australian Synchrotron, in a study that was published in Scientific Reports

The extraordinary properties of silk are linked to the of polypeptides and its amorphous/crystalline composition in the

"The goal was to identify the orientation of proteins in different parts of the fibre and to look at how laser treatment can alter the protein structure in the silk fibre," said Dr Mark Tobin, Principal Scientist ‒ IR beamline at the Australian Synchrotron. 

"You would need to know the effect of a laser on silk, for example, in order to 3D print the silk," said Tobin.

Molecular orientation is responsible for the optical, mechanical and thermal properties of biomaterials. In this study, the researchers were interested in investigating the molecular orientation of specific protein bonds in the silk that play a critical role in its strength.

Infrared imaging at the Australian Synchrotron can access molecular orientation of the protein structure directly from a single silk fibre.

"You can obtain infrared absorption information that is selected based on the orientation of a particular chemical bond," explained Tobin.

Hyper-spectral imaging

"Because the silk fibres are only 10 microns across and the synchrotron infrared beam is about half the size of that, we developed an optical device using a germanium crystal that allowed the beam to pass through the fibre's cross section at four times higher resolution."

New infrared imaging technique reveals molecular orientation of proteins in silk fibres
High resolution 1.9 μm ATR FT-IR maps at 1.9 μm resolution of the longitudinal (L) cross sections of silk presented in auto-scale for better viewing. Credit: Australian Synchrotron

This specific device, which was developed by Vongsvivut and Tobin at the Australian Synchrotron, was recently used successfully on carbon fibres and has shown to be efficiently suitable in a broad range of applications.

Silk is a semi-crystalline material that is birefringent, which means as well as absorbing polarised light in one way it actually rotates the polarisation.

The researchers used an infrared filter to progressively rotate the polarisation of the beam and collected four infrared (chemical) images ‒ each one with the polarisation 45 degrees apart. This unique four polarisation method was developed by the collaborative researchers in Japan. Using a mathematical formula to transform the polarisation data, they were able to work out the molecular orientation of the protein structure in the silk fibres.

Infrared imaging

In an infrared image, the intensity of the colour indicates the strength of the absorbance. 

"In the infrared wavelengths, you see peaks in the spectra that tell you where the light is being strongly absorbed," said Tobin.

"A bond vibrates at a certain energy level at a natural frequency. If light comes in at the same frequency, it can absorb some of that infrared light and vibrate to a slightly higher level," explained Tobin.

The spectra generated in infrared images revealed that the primary vibration of the Amide II bond was all along the direction of the chain and the vibration of the Amide A bond was perpendicular to the fibre.

"With that information, our collaborators were able to work out that the protein molecules oriented in a particular way in the ."

When a pulsed laser was used on one of the bonds, it disrupted the Amide A bond, changing the structure.  

"Although the bulk information of fibres has probably been known, it has not been possible to measure molecular on single fibres before," said Tobin.

More information: Meguya Ryu et al. Orientational Mapping Augmented Sub-Wavelength Hyper-Spectral Imaging of Silk, Scientific Reports (2017). DOI: 10.1038/s41598-017-07502-3

Journal information: Scientific Reports

Citation: New infrared imaging technique reveals molecular orientation of proteins in silk fibres (2017, September 20) retrieved 28 March 2024 from https://phys.org/news/2017-09-infrared-imaging-technique-reveals-molecular.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Collaborative research may lead to improvements in the production of carbon fibres

143 shares

Feedback to editors